Additional information
Weight | 50g |
---|---|
Model Number | IO56D02 |
Compatible Audio & Video Equipment Style | Other |
Brand Name | eletechsup |
Certification | NONE |
Origin | Mainland China |
47.59 $
2031 in stock
Weight | 50g |
---|---|
Model Number | IO56D02 |
Compatible Audio & Video Equipment Style | Other |
Brand Name | eletechsup |
Certification | NONE |
Origin | Mainland China |
Product Name:
12V 24V DC Motor Controller Relay Board Forward Reverse Control Limit Start Stop Switch Pusher Electric Curtain Automatic Door
Wiring Reference Diagram:
General wiring:
Wiring Diagram 1: Two position switch reciprocating
moving backward and forward in a straight line.
Wiring Diagram 2: Positive and negative start independently, each time running a single pass
Wiring Diagram 3: Every time you start, run a forward and reverse rotation
Product Included:
1pcs DC motor forward and reverse controller
Product parameters:
1 Working voltage: DC 12V 12V version or 24V 24V version DC power supply power ≥ motor load x3;
2 Applicable motor: brushed DC motor;
3 Maximum load current: 4.5A;
4 Signal input: active low NPN;
5 Working modes: 9 optional modes, including momentary, self-locking, etc.;
6 Working current excluding motor: Quiescent Current: 4MA, Forward or Reverse working current: 40MA
7 Size: 75 x 40 x 19mm;
8 Weight: 37.6 grams.
Pin Description
VCC : Power Supply +
GND : Power Supply –
M+ : Motor +
M- : Motor –
GND : Trigger Signal –
K1 : Forward input control
K2 : Reverse input control
S1 : Forward limit signal
S2 : Reverse limit signal
This module has 4 signal input terminals, namely K1, K2, S1, S2, K1 is the forward rotation signal input terminal, K2 is the reverse rotation signal input terminal, and S2 is the forward rotation limit signal Input terminal, S2 is the reverse limit signal input terminal. The signal input source can be selected from micro switch, induction, infrared, metal, remote control and other modules, and can also be controlled by a single-chip microcomputer.
Working mode:
Mode 0 default :
Self-locking mode, the signal only needs to be triggered once, and the module self-locking keeps running.
– When encountering a reverse signal during forward rotation, immediately stop for 0.3 seconds and then enter reverse rotation;
– The limit signal has priority, and the forward limit signal will be stopped immediately when the forward rotation is encountered;
– The forward rotation cannot be started when there is a forward rotation limit signal, and the same is true for reverse rotation;
– The forward rotation signal and the reverse rotation signal are valid when the low level, that is, a short-term 0V level negative power supply, will start;
– The limit signal is normally open; For example, when the SW1 switch is closed or connected to a low level, the forward rotation cannot be started.
-Only one limit signal is valid at a time, for example: inputting two limit signals at the same time during reverse rotation cannot stop the motor rotation.
Mode 1 :
The automatic start version of mode 0 adds the power-on automatic start function on the basis of mode 0, that is, each time the module is powered on, it will automatically start forward rotation. This version is more suitable as a motion module between two points, and it will work automatically when the module is powered on.
Mode 2:
Momentary mode. When there is a forward rotation signal, the motor rotates forward; when there is a reverse rotation signal, the motor reverses; when there is no forward rotation signal and no reverse rotation signal, the motor stops; when forward rotation, if there is a forward rotation limit, it will stop forward rotation; During rotation, if there is a reverse rotation limit signal, the reverse rotation will be stopped. Removing the two limit signals will not restore the rotation, and it is necessary to re-input the rotation signal to start the forward and reverse rotation.
Mode 3:
The level-driven mode, similar in function to the H-bridge, operates according to the following logic:
When there is a forward rotation signal and there is no signal at the forward limit, it will rotate forward; when there is a reverse signal and there is no signal at the reverse limit, it will reverse; this version is pure logic type, suitable for single-chip signal input. Pay attention to the forward rotation priority, that is, forward rotation is when both the forward and reverse input meet the conditions.
Pay attention to the real-time nature of the level. For example, when there are signals at the forward and reverse input terminals at the same time, it is forward rotation. At this time, if the forward rotation signal is removed and the reverse signal is retained, it will reverse. The limit input is invalid when the motor is rotating, and the motor cannot be stopped.
Mode 4:
Start/Stop mode, the function is the same as mode 0, only the following function details are different:
If the forward rotation has been started, input the forward rotation signal again, it will stop immediately; if the reverse rotation has been started, input the reverse rotation signal again, it will stop immediately. For example: there is a forward signal >>> forward rotation immediately; at this time, input the forward rotation signal >>> immediately stop forward rotation. Reverse the same.
Mode 5:
The function is the same as mode 0, only the limit signal difference is as follows:
The limit signal is only valid for the current time the leading edge is valid.
For example, after starting the forward rotation, it will stop when the forward limit signal is encountered. After the stop, although the forward limit signal is still input, the forward rotation can still be started by inputting the forward rotation signal at this time. When the unidirectional start and end points are on the same motion circle, this specification is usually used, for example, press once to make a circle, and press it again to make another circle.
Mode 6:
One-key switch mode, the function is the same as mode 0, only the starting method is different, as follows:
Forward rotation signal input, forward rotation after triggering, reverse rotation after re-triggering, and reverse rotation signal input is invalid. Input the forward rotation signal once to start the forward rotation, and stop the forward rotation when the forward limit has a signal; input the forward rotation signal again, start the reverse rotation, and stop the reverse rotation after the reverse rotation limit has a signal.
Mode 7:
Forward rotation when there is a forward rotation signal input, reverse rotation when there is no signal, and the reverse rotation signal input is invalid and cannot be input together with other signals. During forward rotation, the forward rotation will be stopped if there is a signal at the forward limit; during reverse rotation, the reverse rotation will be stopped if there is a signal at the reverse limit. Only one limit signal is valid at a time.
for example: inputting two limit signals at the same time during reverse rotation cannot stop the motor rotation.
Mode 8:
Self-locking-limit normally closed mode, only the difference of the position signal, other functions are the same as mode 0. The limit signal is normally closed for example, when there is no signal input to the forward limit, the forward rotation cannot be started, and only when the forward limit signal is input, the forward rotation can be started.
Power Requirements:
The DC motor governor input should be DC power. The power supply can be used but not limited to the following types: switching power supply, DC output transformer, lead-acid battery, lithium battery, solar battery and so on. The power connection wires are connected to the VIN and GND terminals respectively, and the positive and negative poles of the power supply cannot be reversed. The power supply voltage range is DC 11-15V 12V version, and it can work normally between DC 22-26V 24V version; DC power requires power ≥ motor power × 3.
Motor Requirements:
IO56D02 is a DC motor controller, and the applied motor should be a brushed DC motor. Connect the motor connecting wires to the terminals of Motor+ and Motor- respectively. Motor power requirements: the rated power of 24V DC motor is less than 100W, and the limit value is 200W; the rated power of 12V DC motor is less than 50W, and the limit value is 100W.
Support Dropshipping and Wholesaling. 100 Original and Good Quality with Free After-sale Warranty. 1. It's high Amp item, and the device needs certified and professional electrician for wiring.2.The frequency of the wireless router is 2.4GHz.3. The meter requires the measured device must have neutral wire. otherwise it can't measure the device's voltage, current, and power.Material: plasticcolour: As shownPackage Contents:1 x 3 Phase WiFi Energy KWH Meter80A/1 x 3 Phase WiFi Energy KWH Meter120AOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a [...]
135.00 $ Add to cartbody { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
87.51 $ Add to cartWe offer competitive price,reliable shipping and better communication service.If you need the datasheet for this product,please leave a message. Welcome to send your request if we don't have in our store. Yubico Security Key NFC - Two Factor Authentication USB and NFC Security Key, Fits USB-A Ports and Works with Supported NFC Mobile Devices – FIDO U2F and FIDO2 Certified - More Than a Password. Item Description SECURITY KEY: Protect your online accounts against unauthorized access by using 2 factor authentication with the Yubico Security Key NFC. It's the world's most protective USB and NFC security key that works with [...]
150.75 $ Add to cartNew BN96-12944C/B BN96-12941A For Samsung TV UA32C4000P LCD TV Speakers Feature s: l Brand new and high quality l High quality for professional use l Replace the original damaged parts to ensure long lifetime and better work performance l Easy to use stable performance Specification: l Types: High-Pitched Speaker Core/ Bass S peaker CoreOptional l Applicable M odel : for Samsung TV UA32C4000P l Quantity: 1 PCS Package: [...]
52.99 $ Add to cartFeatures ● infrared resolution: 120 × ninety● temperature measurement range: - 20 ~ 400 ℃● temperature measurement mode: center point, high and low temperature tracking● photo storage: 16GB TF Card● high and low temperature alarm: image, beep, LED flashing● laser indication / LED lighting● three prevention design: IP54 / two meter fall prevention● PC analysis software● six palette options● adjustable emissivity● the service time shall not be less than 9 hours● 3.7v/2600mah rechargeable lithium battery● bottom design ¼ Screw holes can be used with tripod Uti120s detailed description 1. WORLDWIDE SHIPPING.Except some countries and APO/FPO2. Orders processed timely after [...]
282.00 $ Add to cartProgrammable Eight Decade Resistor Board 1R-9999999R Step Accuracy 0.1R 1/2 Watt SMD Resistance Module Description: This is resistance substitution box good low-cost alternative solution with good accuracy, wide range and 0.1R step accuracy. for educational experiments, electronic engineering design or test trimming are excellent applications. Can flexible and quick setting resistance range from 1R to 9999999R or 0.1-9.9999999MR 0-10MS . Feature: Design based on resistors series theorem. 1/2 watt tolerance +/-1 SMD resistors. High quality FR4 glass fiber PCB. With spare parts 8 pieces jumper caps Specification: Programmable Resistance: 0 to 9,999,999 ohm, [...]
42.54 $ Add to cartDetails: You are buying Micro SD card Double Adapter, which will allow you to convert your iPod Video 5th/5.5th Gen and iPod Classic 6th/6.5th/7th Gen from using a hard drive to using Micro sd card Double Adapter Sell products : 1 X iFlash Double Adapter which + 1 X tools + 1X Hard Disk Connect Flex Ribbon Cable Advantages:No need to change the thick back shell For those seeking solid state storage capabilities for their iPod, the allows you to install and use micro sd cards. With much lower power consumption than the original Hard drive, longer run times and quicker user interface. [...]
104.53 $ Add to cart85774 Ratón y teclado KSD301 250V 10A 95 °C Cierre Normal NC temperatura controlada interruptor termostatoAltavoz OOTDTY Descripción:100 nuevo y de alta calidadAmpliamente utilizado para control de temperatura o protección de electrodomésticos eléctricos.Se cierra hasta que la superficie alcanza los 95 grados Celsius, luego el interruptor se abre.Propósito, reinicio automático, bajo costo, gran capacidad, termostatos de corriente electrodomésticos, PC, hornos de microondas, planchas, refrigeradores, horno electrónico, unidad de calefacción, café, calentador de agua, etc.Tipo de acción: Cierre Normal N.C.Temperatura de acción: 95 Â 250V 10AResistencia de circuito 50 MohmResistencia de aislamiento 100 MohmTamaño: 3,3x2,1 cm/1,3 pulgadas x 0,8 [...]
41.68 $ Add to cartIf you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day!!Welcome to my store,Please contact me if you meet any question,I will try my best to satisfy you. We specialized in T-con board and other electronic products. We have own factory and a large number of T-con boards to sell, please contact me what model you [...]
47.16 $ Add to cartNote:MIDIWORX is the original design company for this product! MediaWorks / MediaWorx is our former name/logo used before. Now we'll start changing to / use this new LOGO and Brand as they are formally registered. ADAU1463/1467 is the latest and powerful digital audio DSP SIGMADSP/SIGMA350 chip introduced by ADI from 2017. It integrates 32-bit single precision/64-bit double precision audio DSP core, SPDIF Tx/Rx, Aux ADCs, IIC + SPI, GPIO, I2S in & out, etc. , Has been widely used in car audio, professional audio or consumer audio products. ADAU1463/1467 is a fully programmable DSP. Its development adopts the pure graphical [...]
120.66 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.