2 Pcs 12V PET metal heating film Heated Grips Inserts Handlebar Hand Warmers For Universal Grip ATV Motorcycle 22mm in diameter

Description

product name: 50 can be sealed, can pass the electric handle
product model: CS-095D1
product net weight: 236g
product gross weight: 260g
product color: black

hand length: left hand: 143 x 36MM; right hand: 127 x 36mm
handle diameter: 22mm
Input voltage: 12V
product power: 12W-24W adjustable
Handle temperature: 50 ° C -70 ° C adjustable

handle type: can be sealed, can pass the electric hot handle
Switch Type: Multi-speed adjustable switch

Applicable models: Handle 12V motorcycle with diameter of 22MM
【Precautions】:

1 When installing the left handle, do not twist the handle too much. Excessive twisting will cause the heating wire to shift.

2 With the balanced iron model, please adjust the balance iron installation position. Do not squeeze the handle when tightening the screw. The balance iron is slightly separated from the handlebar. If the installation position of the balance iron cannot be adjusted, please separate the balance between the balance iron and the handle. Excessively squeezing the handle will cause difficulty in the toggle of the handlebar, and the surface of the heating wire will be abnormally damaged.
【Installation Notes】:
1 Remove the original driver's handle

2 The inner hole of the left hand is moistened with soapy water, and the twisting amplitude during installation cannot be too large.

3 When the balance iron is installed on the left handle, the balance iron position is adjusted to be slightly separated from the handle, and the handle cannot be squeezed when the screw is tightened.

4 Use the left hand handle to slide on the steel pipe, remove the balance iron, and fix a few drops of 502 glue from the tail of the handle.

5 Power line, the red line is connected to the positive pole, the black line is connected to the negative pole, and the reverse connection temperature cannot be adjusted.

6 When the left hand is installed, the power cord should be left with enough remaining turns.
【Product advantages】:

1 12V voltage, 22MM handle inner diameter, suitable for most motorcycles

2 The product sets high and low level switch, which can adjust the handle temperature at will 50°C-70°C adjustable

3 Double throttle line buckle, wider installation range

4 It can be sealed and designed for the mouth. It does not affect the installation of the handlebars outside the handlebars. Only the decorative accessories such as lamps are more beautiful and convenient.