Additional information
Power | 2KW 3KW |
---|---|
Voltage | AC |
Model Number | Bathtub Heater |
Origin | Mainland China |
Certification | CE |
192.14 $
1998 in stock
Power | 2KW 3KW |
---|---|
Voltage | AC |
Model Number | Bathtub Heater |
Origin | Mainland China |
Certification | CE |
2KW 3KW Massage Bathtub Heater SPA Thermostat Circulating Heating for Hot and Cold Tubs Bathtub SPA Water Heater Equipment
Feature:
1. Widely used in the circulation system of hot springs and hot tubs with pressure to keep and heat the water temperature.
2. Cold water can also be heated, mainly for heating and thermostatic functions, install heater in the position of the bottom level.
3. This thermostat has the characteristics of excellent performance, complete functions, practicality and easy operation.
4. The water heater will start to work after the bathtub is filled with water. It is specially designed for hot and cold bathtubs and suitable for bathtub SPA.
5. Our water massage equipment heater does not require any special maintenance or programming and is easy to use.
Specification:
Item Type: Bathtub Heater
Material: Stainless Steel
Color: As shown in the picture
Product Size: Approx. 30×13.5×5.5cm / 11.8×5.3×2.2in
1# Pipe Connector Size:
Thickness: Approx.4mm / 0.16in
Height: Approx.4.4cm / 1.7in
No Thread Outside Diameter: Approx.5.7cm / 2.2in
2# Pipe Connector Size:
Thickness: Approx.3mm / 0.12in
Height: Approx.4.4cm / 1.7in
No Thread Outside Diameter: Approx.5.7cm / 2.2in
Weight: Approx.1550g/54.7oz
Model: H30-R1
Product Power: 3KW
Working Voltage: AC220-240V
Waterproof Rating: IPX5
Current: 13.6A
Applicable Bathtub Water Capacity: 1280L
Model: H20 – R1
Product Power: 2KW
Working Voltage: AC220-240V, 50/60HZ
Waterproof Rating: IPX5
Current: 9A
Applicable Bathtub Water Capacity: 750L
Purpose: Constant temperature heating
Heater Type: Water heater
Applicable Places: Massage bathtub, bathtub SPA.
Installation Method:
1. The bathtub water heater should be connected to the tubing circulation system, and can also be connected to the inlet and outlet of the bathtub pump to ensure that the direction of water flow conforms to the instructions on the bathtub water heater.
1. The heater must be installed horizontally.
2. The heater can be installed with the inlet or outlet of the bathtub pump. Note: Cannot be fixed by binding
3. PVC pipe: cut a specific length of polyethylene from the pump outlet and connect to the nozzle. Note: The size of the pipe joint should be the same as that of the bathtub pipe
4. Pipe joints: clean the PVC pipe joints, and then use glue to connect the PVC pipe and joints together. Note: installation distance between heater and pump
5. Heater installation: Separate the connecting nut and connect the PVC pipe to the heater Note: O-ring. Make sure the connection is tight enough. Note: The connecting nut is made of plastic material, too much force will cause damage.
6. Connect the knob to the thermostat heater at the threaded diameter of the fitting, then apply glue to the inside of the fitting connector without thread, and then insert the pipe to be connected in addition, the outer wall of the pipe is also coated with glue, so that it is more firm.
7. After the bathtub heater is installed, it must be checked:
●If the pipe or connection is leaking: Pour water into the bathtub and run the pump for 30 minutes to ensure that the circulating water system does not leak.
●If the heater does not start, try to find the problem in the most common faults and possible solutions provided.
Package List:
1 x Bathtub Heater 1 x English Manual 2 x 1# Pipe Connector 2 x 2# Pipe Connector 2 x Gasket
Note:
1. In order to avoid damage caused by inadvertently resetting the thermal circuit breaker, it must not be powered by external switching devices such as timers or connected to a circuit that regularly switch on and off by utilities.
2. The two gaskets are universally used for 4 connectors. When using the thermostat, connect two of the connectors according to your own pipe size requirements and install the gaskets, and then turn the knob to both ends of the thermostat.
1 We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
2 Payment must be made within 3 days of order.
3
If you cant checkout immediately after auction close, please wait for a
few minutes and retry Payments must be completed within 3 days.
About shipping
1. WORLDWIDE SHIPPING. Except some countries and APO/FPO
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes
weekends and holidays. Transit times may vary, particularly during the
holiday season.
6. If you have
not received your shipment within the period, please contact us. We
will track the shipment and get back to you as soon as possible with a
reply. Our goal is customer satisfaction!
7. Due to stock status and time differences, we will choose to ship
your item from our first available warehouse for fast delivery.
8. We seller are not in charge of import duty, buyer is responsible for that. Any dispute caused by this is unreasonable.
9. BR buyer please provide the cpf or cnpj, it will be better for you to get it more quickly. thanks
Return and Refund
1.
You have 7 days to contact us and 30 days to return it from the date it
was received. If this item is in your possession more than 7 days, it
is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT.
There are NO EXCEPTIONS! Shipping cost is bear by both seller and buyer
in half.
2. All returned items
MUST BE in the original packaging and you MUST PROVIDE us with the
shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the
item in its original condition and packaging with all components and
accessories included, AFTER BOTH Buyer and Seller cancel the transaction
from PORTAL. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the products is are not as advertised.
About feedback
We
maintain high standards of excellence and strive for 100 customer
satisfaction! Feedback is very important We request that you contact us
immediately BEFORE you give us neutral or negative feedback, so that we
can satisfactorily address your concerns.
It is impossible to address issues if we do not know about them!
100 brand new and high quality. Features: Automatic constant temperature. High performance and high power. Can also be used for BGA solder ball. Can be used to disassemble the LED light bead and FPC board. PTC heating plate and heat dissipating aluminum sheet construction. 30 seconds will be reach about 260 degree celsius ±10 degree celsius. Fine workmanship and good performance. Long service life. Specification: Color: silver Material: aluminum 2 Sizes A: 7cm/2.76 × 6.8cm/2.68 B: 7cm/2.76 × 12cm/4.72 Power: A200W, B400W Voltage: 220V Temperature: 260 degrees Quantity: 1set Note: Transition: 1cm=10mm=0.39inch Please allow 0-1cm error due to manual measurement. [...]
47.24 $ Add to cartjewelry melter High-temperature Small Melting Furnaces With 1kg 2kg 3kg graphite crucible small melting furnace Jewelry Casting Equipment Jewelry Tools 1500W 220/110V Jewelry tools, jewelry equipmentHigh quality, low priceWarranty 1 yearEasy to operateDescription1. 2 kg gold furnace: Vertical furnace is specially designed and manufactured to melt metal to cast and alloy metal up to 1100℃.2. 2 minutes gold coins take 40 minutes.3. Dimensions: 20 x 20 x 40mm,4. Weight: 9kg,5. Voltage: 220V/110V, 50 / 60HZ.Feature:1. High-purity fiber alumina chamber for energy saving - chamber size: 60 mm diameter. x 150 mm deep.2. Precise temperature control, easy-to-read digital display and LED [...]
415.15 $ Add to cart300W/ 500W/ 1000W LED REDTHERAPY LIGHT PANEL The 300W/ 500W/ 1000W LED Red Therapy Light panel are ideal for full body skin and tissue therapy, which make with 60/100/200pcs by 5W High Power LED Chips, 60 or 90 degree lens with high penetrate. Also these panels with pure Red 660nm, pure IR 850nm, and popular design Red 660nm mix IR 850nm all three options, customers who can select the one as what you need.The 300W with 2 switches on / off, Red light on, Near-infrared light on, or both Red and NIR light on. The 500W and 1000W with timer [...]
235.01 $ Add to cartFeatures : 【Magnetic Induction Heating】: With the application of magnetic induction technology, there is no open fire, and other parts will not be damaged in the heating process, so it has excellent Design】: The LED light on the top of the product allows you to operate normally in the dark, and the anti-skid grip makes you operate more And Convenience】: It is unwise to use open fire to heat the nut, which not only can not achieve the effect, but also is very dangerous. This machine has no open fire in the work, and is heated evenly [...]
363.45 $ Add to cartFeatures: ZVS induction heating board kit can be used by DIY players for hardening, annealing and other heat treatments of small parts. It can be used with graphite crucible not included to smelt gold, silver, copper, aluminum and other metals, heating quickly and evenly. High-quality PCB board heating module, with nice durability, stable performance, wear-resistant and corrosion-resistant. Heating circuit adopts 12-48V low-voltage direct current power supplys, maximum current 20A, maximum power 1000W. The higher the voltage, the greater the heating current, the effect is better and the heat is greater, choose the right voltage according to the actual [...]
65.43 $ Add to cartProduct Description High Frequency Induction Heater Furnace The high-frequency 15 kW induction heater uses advanced technology, simple and easy to operate, high efficiency, low energy consumption, high output power. It selects a power source based on power and frequency. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the heat permeability. Widely used in brazing, silver welding, hot forging, melting, quenching, etc. Advanced Technology Heating Quickly Automatic Control Safety Protection Tough Equipment & Tools, Pay Less VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, [...]
1,061.71 $ Add to cartWaterproof: Can fully to block stains and liquids , always keep you dry and clean. Quick Dry: Special material improves air permeability, transfer moisture away quickly, help you maintain dry in damp weather. Warm:The inner lining is made of granule fleece for warmth. High Performance Outdoor Sports Hiking Pants are fearless. Winter activities become more interesting when clothes are not bulky. Ucrazy snow sports are made of a soft, pliable material that stretches in multiple directions. Let the clothing limit your movements to a minimum. After years of hard work, [...]
80.60 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.