5/10PCS Nozzle Cleaning Needle Special Drill Cleaner Stainless Steel For MK8 V6 nozzle Through Holes 0.2-1.0mm 3D printer parts

Description

product description

The drill bit is needle-shaped and mainly serves to clean the blocked nozzles. The surface of cleaning needle is smooth and without cutting thread ,so it does not scratch the nozzle.Lengthened, apply with new technology, not easy to break, very flexible ,0.15~0.4mm bendable.

Tips: Before use this nozzle cleaning needle, first please make sure your nozzle is heated upto the temperature of the printing filament you used.For example, if you are printing ABS , please heat the nozzle to 200-220 celsius degree, PLA is about 180-200 celsius degree.

Type: Nozzle Cleaning Needle

Diameter of Needle: 0.15mm,0.2mm, 0.25mm, 0.3mm, 0.35mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1mm Please allow 0.05mm error due to manual measurement

Fit for Nozzle Type: for V6 Nozzle, for MK8 Nozzle, for MK10 Nozzle, for Volcano Nozzle.

Material: 0.2/0.25/0.3/0.35/0.4 mm is stainless steel ,0.5/0.6/0.8/1.0 mm is copper and stainless steel

Color: 0.2/0.25/0.3/0.35/0.4 mm is silver, 0.5/0.6/0.8/1.0 mm is copper+ silver,Cover color red/blue

This list contains 5 pcs Nozzle Cleaning Needles,it is able to choose the single size or the mixed size set.

Set of 13pcs Mixed Size contains: each of 0.15,0.2,0.25,0.3,0.35,0.4 x 4pcs,0.5,0.6,0.8,1.0mm

Set of 6pcs Mixed Size contains: each of 0.15,0.2,0.25,0.3,0.35,0.4mm

Length; 0.15-0.3=70mm     0.5/0.6/0.8=75mm   1.0=85mm

0.35=70/105mm   0.4=80 / 105mm

If you need mix sizes, please make a note when ordering or contact customer service,thank you