Additional information
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Origin | Mainland China |
Certification | NONE |
41.51 $
6000 in stock
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Origin | Mainland China |
Certification | NONE |
Feature:
Charge protection, prevent the battery overcharge and overdischarge, and automatically control the charging current, better protect the battery.
Type-C female base interface, reserved with input voltage welding electricity, convenient for DIY.
Specification:
Input voltage: 4.5V-5V
Maximum charging current: 1000mA
Charging cut-off voltage: 4.2V+-1
Battery overdischarge protection voltage: 2.5V /3A
Board size: 2.8cm x 1.7cm/1.1 x 0.66
Package weight: 3g
Operation Manual:
1. Type-c female base and the power input end of + ~ welding pad position next to it, connect to 5V input voltage.
2. B+ is connected to the positive electrode of lithium battery, and B~ is connected to the negative electrode of lithium battery. OUT+ OUT connect loads, such as set-up board.
3. Connect the battery to B+ B-, insert the phone charger to USB, the blue light is on, indicating that there is a power supply, the red light flashes, indicating that it is charging. When the charge is full, the red light stops flashing and turns into a regular light.
4. OUT+ OUT- terminated can be load. After load on, the red light is always on. When there is a power supply at the input end, obtain current from the output end of the power supply. If there is no power supply, obtain current from the battery. When the battery voltage is lower than 2.5v, automatically close the output.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
5 X TP4056 1A Lithium Battery Charger Modules
1. WORLDWIDE SHIPPING. Except some countries and APO/FPO
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.
6. If you have not received your order after 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction!
7. Delivery Time:
1. You have 7 days to contact us and 30 days to return it from the date received. If
the item is in your possession more than 7 days, it will be considered used and WE WILL NOT ISSUE A REFUND OR REPLACEMENT to you. There are NO EXCEPTIONS!
Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from PORTAL. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the products is are not as advertised.
Defective items MUST BE reported and returned with original packaging, if possible. You must tell us what the defect is and give us your order number.
You agree to all of the above-listed policies upon ordering on PORTAL!
We maintain high standards of excellence and strive for 100 customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them!
Product Name: 12V 24V DC Motor Controller Relay Board Forward Reverse Control Limit Start Stop Switch Pusher Electric Curtain Automatic DoorWiring Reference Diagram: General wiring:Wiring Diagram 1: Two position switch reciprocatingmoving backward and forward in a straight line. Wiring Diagram 2: Positive and negative start independently, each time running a single passWiring Diagram 3: Every time you start, run a forward and reverse rotation Product Included:1pcs DC motor forward and reverse controller Product parameters: 1 Working voltage: DC 12V 12V version or 24V 24V version DC power supply power ≥ motor load x3;2 Applicable motor: brushed DC motor;3 Maximum load [...]
47.59 $ Add to cart5pcs 3A MINI DC-DC STEP DOWN CONVERTER VOLT REGULATOR 5V-23V TO 3.3V 6V 9V 12V 340KHz Specification: Size: 17 x 11 x 3.8mm Color: multicolor Material: electronic components Input voltage: 4.75V-23V Output voltage: 1V-17V Output current: 3A peak, 1.8A for long time Transfer efficiency: 96 MAX. Switching freqnency: 340KHz Output ripple: 30mV no-load Load regulation: ±0.5 Voltage regulation: ±2.5 Working temperature: -40~85℃ Package list: 1/5/10 x DC -DC power supply module Features: 1. Efficiency: Up to 96 depends on the difference between input and output voltage This module uses synchronous rectification, efficient power conversion available. 2. Good performance: Use [...]
43.18 $ Add to cartDetails: You are buying Micro SD card Double Adapter, which will allow you to convert your iPod Video 5th/5.5th Gen and iPod Classic 6th/6.5th/7th Gen from using a hard drive to using Micro sd card Double Adapter Sell products : 1 X iFlash Double Adapter which + 1 X tools + 1X Hard Disk Connect Flex Ribbon Cable Advantages:No need to change the thick back shell For those seeking solid state storage capabilities for their iPod, the allows you to install and use micro sd cards. With much lower power consumption than the original Hard drive, longer run times and quicker user interface. [...]
104.53 $ Add to cartT-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Introduce: T-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Version, change GPS / LoRa chip and LoRa antenna based on T-Beam V1.1. LoRa chip using Semtech SX1262 LoRa RF transceiver chip design, works in the 868/915MHz ISM frequency band, integrates a highly stable TCXO 32MHz crystal oscillator, half-duplex transceiver module, power up to +22dBm, to -139dBm receiving sensitivity. The LoRa antenna interface is changed from SMA to IPEX , which is more convenient to store. GPS chip using Semtech NEO-M8N GNSS chip design, also support GPS Beidou GLONASS, stronger positioning signal, The [...]
124.33 $ Add to cart4295 Description This antenna is a dual-frequency antenna. I use it on my WiFi deauther OLED application. I find ESP8266 Mini D1+antenna works much better than ESP-12E/F. So I decide to use ESP-07+this antenna for all my projects. Product specifications 4900~5900MHz S.W.R.:<=1.8 Antenna Gain: 8dbi Radiation: Omnidirectional antenna Polarization: Linear Impedance:50R PCB size: 95mm13.5mm0.55mm Wire distance: 15cm Connector: IPEX Packing List: 1Pc IPEX 8dBi Antenna for ESP8266 Mini D1 [...]
42.18 $ Add to cartbody { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
64.20 $ Add to cartProduct Name: 7CH DC 12V RS485 NTC Thermistor Temperature Sensor Modbus Rtu Remote acquisition monitor Module B3950 10K 1 Packing list: 1 pcs NT18B07 7CH RS485 NTC Temperature sensor Board Description : 1: Operating Voltage : DC 6-24VDC 7.5V 9V 12V 15V 24V2: Operating Current :7-15MA3: MODBUS RTU Command support 03 06 function code4:Serial port baud rate: 9600 default, N, 8, 15:By modifying the 485 address, up to 247 modules can be cascaded more than 16 please use R485 repeater6:Adapted sensor: B3950 10K 1 NTC thermistor, Up to 7 NTC sensors can be connected at the same time7:Temperature [...]
51.93 $ Add to cartProduct name: 2P 63A bus bar 4-12 teethActual specifications: 1.4 thick x 6.6mm wide manual cutting, width plus or minus 0.2mm, tooth width 5.5mm.Product spacing: A phase-A phase spacing 36mm.Product description: Thickness of copper pieces x width of horizontal row width refers to the width of horizontal row of copper pieces, not the width of teeth.Product material: red copper primary color.Product insulation: PVC flame retardant plastic.Scope of use: It can be connected to C45 type, DZ47 type, IC65N type and other miniature circuit breaker air switches specifically depends on the circuit breaker phase spacing, it is not recommended to [...]
43.26 $ Add to cartIf you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day!!Welcome to my store,Please contact me if you meet any question,I will try my best to satisfy you. We specialized in T-con board and other electronic products. We have own factory and a large number of T-con boards to sell, please contact me what model you [...]
47.90 $ Add to cartDimension Long 65mmx wide 40mmx 25mm high Features The circuit is simple,safe and reliable. Operating voltage AC 12-16V, suggest to use an independent power supply for it. Sampling delay of 3-5 seconds of 1.2V DC Sampling 3-5 seconds delay. Package included 1 x Speaker protection board DIY Components kit for Stereo This products include all components and PCB as the [...]
45.05 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.