Additional information
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Origin | Mainland China |
Certification | NONE |
41.56 $
3000 in stock
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Origin | Mainland China |
Certification | NONE |
Feature:
Charge protection, prevent the battery overcharge and overdischarge, and automatically control the charging current, better protect the battery.
Type-C female base interface, reserved with input voltage welding electricity, convenient for DIY.
Specification:
Input voltage: 4.5V-5V
Maximum charging current: 1000mA
Charging cut-off voltage: 4.2V+-1
Battery overdischarge protection voltage: 2.5V /3A
Board size: 2.8cm x 1.7cm/1.1 x 0.66
Package weight: 3g
Operation Manual:
1. Type-c female base and the power input end of + ~ welding pad position next to it, connect to 5V input voltage.
2. B+ is connected to the positive electrode of lithium battery, and B~ is connected to the negative electrode of lithium battery. OUT+ OUT connect loads, such as set-up board.
3. Connect the battery to B+ B-, insert the phone charger to USB, the blue light is on, indicating that there is a power supply, the red light flashes, indicating that it is charging. When the charge is full, the red light stops flashing and turns into a regular light.
4. OUT+ OUT- terminated can be load. After load on, the red light is always on. When there is a power supply at the input end, obtain current from the output end of the power supply. If there is no power supply, obtain current from the battery. When the battery voltage is lower than 2.5v, automatically close the output.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
5 X TP4056 1A Lithium Battery Charger Modules
This amplifier board using ADI's class-D amplifier SSM3302, plus DSP ADAU1701 for EQ, crossover, limit, volume control etc. the optional boards are: 4 x 10W SSM3302 x 2 2 x 20W SSM3302 x 2 IN MONO 4 x 25W SSM3582 x 2 All board support analog in besides Bluetooth in mode also. There is a volume controller on the board, you can change the whole input volume. The output mode/EQ/crossover setting can be customized as you liked, please let me know if you want. The default setting is just 2ch in and copied to 4 ch out, my default EQ [...]
108.91 $ Add to cartWe offer competitive price,reliable shipping and better communication service.If you need the datasheet for this product,please leave a message. Welcome to send your request if we don't have in our store. Yubico Security Key NFC - Two Factor Authentication USB and NFC Security Key, Fits USB-A Ports and Works with Supported NFC Mobile Devices – FIDO U2F and FIDO2 Certified - More Than a Password. Item Description SECURITY KEY: Protect your online accounts against unauthorized access by using 2 factor authentication with the Yubico Security Key NFC. It's the world's most protective USB and NFC security key that works with [...]
150.75 $ Add to cartmost hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
61.24 $ Add to cartIf you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day!!Welcome to my store,Please contact me if you meet any question,I will try my best to satisfy you. We specialized in T-con board and other electronic products. We have own factory and a large number of T-con boards to sell, please contact me what model you want and I will give you the best price. [...]
47.51 $ Add to cartTTGO LORA32 868/915Mhz 433MHz SX1276 ESP32 Oled-display BT Wireless WIFI Lora development board Adapter Board Features: 1.The antenna needs to be in connection with the IPEX interface if the antenna is not connected, the signal reception will be unstable 2.Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged! 3.With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin 4.Support for Sniffer software protocol analysis, Station, [...]
85.51 $ Add to cart5pcs 3A MINI DC-DC STEP DOWN CONVERTER VOLT REGULATOR 5V-23V TO 3.3V 6V 9V 12V 340KHz Specification: Size: 17 x 11 x 3.8mm Color: multicolor Material: electronic components Input voltage: 4.75V-23V Output voltage: 1V-17V Output current: 3A peak, 1.8A for long time Transfer efficiency: 96 MAX. Switching freqnency: 340KHz Output ripple: 30mV no-load Load regulation: ±0.5 Voltage regulation: ±2.5 Working temperature: -40~85℃ Package list: 1/5/10 x DC -DC power supply module Features: 1. Efficiency: Up to 96 depends on the difference between input and output voltage This module uses synchronous rectification, efficient power conversion available. 2. Good performance: Use [...]
43.18 $ Add to cartDear buyer Have a nice day!! Welcome to my shop. If you have any questions, please contact me. I will try my best to meet you. We specialize in TV accessories and other electronic products. We have our own factory and a large number of T-con boards for sale. Please contact me what model you want and I will give you the most favorable price. Some products are not brand [...]
83.99 $ Add to cartProduct Name: 7CH DC 12V RS485 NTC Thermistor Temperature Sensor Modbus Rtu Remote acquisition monitor Module B3950 10K 1 Packing list: 1 pcs NT18B07 7CH RS485 NTC Temperature sensor Board Description : 1: Operating Voltage : DC 6-24VDC 7.5V 9V 12V 15V 24V2: Operating Current :7-15MA3: MODBUS RTU Command support 03 06 function code4:Serial port baud rate: 9600 default, N, 8, 15:By modifying the 485 address, up to 247 modules can be cascaded more than 16 please use R485 repeater6:Adapted sensor: B3950 10K 1 NTC thermistor, Up to 7 NTC sensors can be connected at the same time7:Temperature [...]
51.93 $ Add to cartNote:MIDIWORX is the original design company for this product! MediaWorks / MediaWorx is our former name/logo used before. Now we'll start changing to / use this new LOGO and Brand as they are formally registered. ADAU1463/1467 is the latest and powerful digital audio DSP SIGMADSP/SIGMA350 chip introduced by ADI from 2017. It integrates 32-bit single precision/64-bit double precision audio DSP core, SPDIF Tx/Rx, Aux ADCs, IIC + SPI, GPIO, I2S in & out, etc. , Has been widely used in car audio, professional audio or consumer audio products. ADAU1463/1467 is a fully programmable DSP. Its development adopts the pure graphical [...]
120.66 $ Add to cartHW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4V Feature: 2S 7.4V/8.4V 18650 lithium battery protection board, suitable for protecting two rechargeable li-ion/lithium polymer batteries in series from overcharge and overdischarge. Specification: Charging voltage: 8.4V-9V Maximum working current: 3A Maximum instantaneous current: 5A Quiescent current: less than 3uA Internal resistance: less than 45mΩ Over-discharge voltage range: 2.3-3.0V ±0.05V Overcharge voltage range: 4.25-4.35V ±0.05V Short circuit protection: it can be protected and needs to be recharged Product size: 36 x 6 x 2mm Product weight: 3g Packing size: 50 x 50 x [...]
40.46 $ Add to cartDC-DC 2-24V to 2-28V Step-UP Power Module SX1308 2A Adjustable Voltage Boost Converter Board Features: Oscillation frequency 1.2MHz, efficiency is as high as 95 Circuit has short circuit protection, overheating protection function. 10k to adjust potentiometer, adjust the output voltage. Description: 1: VIN cathode voltage input 2: GND anode voltage input 3: GND anode voltage input 4: OUT cathode voltage output, the 2 GNDs are intercommunicated, and the pads of the four voltage input/output terminals are 4mm x 4mm pads, and the through hole diameter is 1mm. 5: 10K adjust potentiometer, choose the output voltage [...]
40.46 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.