Description
Notice
This is open sources device, fully compatible with Homekit but not certified by Apple.
To enable HomeKit remote control, you need a HomePod, an Apple TV 4K, Apple TV HD, or an iPad. Set any of these Apple devices in your house as a HomeKit bridge and connect it to your home Wi-Fi network. Keep in mind that once your HomeKit bridge is set up, it has to be kept online. If it is powered off or disconnected from the Wi-Fi, it will fail to respond when you intend to control the device remotely.
Homekit Smart Plug EU/France Standard
Material: ABS+PC
Voltage: 100-250V 50/60Hz
Max. Current: 16A
Max. Power: 3520W
Consumption Monitor: No
Working Temperature: -20℃~50℃
Wireless: WiFi 2.4GHz 802.11b/g/n
Hub Requirement: No
Control Mode: APP/Voice/Manual
Certification: CE, RoHS
How to install product to your Apple Home App
Power on the device and use your compurter or phone search the WiFi until find Homekit_xxxxx and click to connect, wait several seconds until configuation page pop up.
After you connect it, the configuration web will pop up automatically If not, please use your web browser visit IP address: 192.168.4.1 , then choose the WiFi router you want to connect make sure connect to 2.4G not 5.8G
Choose your router and input the password, then save
Open Apple Home APP and click + to add accessory, scan the code or choose I Don't Have a Code or Cannot Scan to install manually
While Home app find the device click it then press Add Anyway
The device has been successfully installed
Touble Shooting
If add unsuccessfully, press and hold the key more than 8 seconds to reset it.
Then try again until success
Reviews
There are no reviews yet.