Ignition control box Yu Fu Bao steamer electronic pulse igniter Jin Hao special steamer 100 years steamer control box

CRECHO Ignition controller blaze stove igniter blaze stove accessories CCA-HO1-A1

CRECHO Hotel kitchen gas stove fierce furnace igniter enhanced CLS-KA replace of CLS-KB 220v

Gas Electronic Ignition Controller Pulse Infrared Burner Igniter Oven Accessories GM103 changed to SHRN322

Label change notice: GM103 is changed to SHRN322 First, the wiring instructions: N: ignition output S: Signal detection Green: Power 220 volts Blue: power sharing line Orange/Blue: PV gas solenoid valve Red/blue: L2 combustion work indicator White/blue: L1 flameout ignition indicator Yellow/blue: siren Black: ground wire Second, the function: Size: 127mm x 70mm x 42mm Mounting hole distance: 118mm aperture φ 5mm Weight: 400g Input voltage: AC220 AC185~AC250V Ignition: output high voltage above 16KV Re-ignition: automatic ignition after flameout Indicator light: flameout ignition indication, combustion work indication, automatic exchange Automatic alarm: Exceeding the ignition time 22 seconds, it will automatically [...]

Methanol Stove Infrared Anti-aircraft Burning Ignition Control System Alcohol Oil Controller

Functional description of infrared anti-air burning controller for commercial stoves This controller is used on commercial gas stoves, which can realize infrared control. Controller working process: Turn on the power switch, the controller starts to ignite, and the solenoid valve is opened at the same time. After 12 seconds, the ignition stops and enters the burning state. At this time, the pot sensor composed of the infrared emitting head and the receiving head detects whether there is a pot on the stove, such as If the infrared light is blocked, it means there is a pot and keep the burning [...]

Programmable controller LME11. 330C2 Black & Decker burner controller LME11. 330C2BT control box

Domestic LME11. 330C2 Domestic LME11. 330C2BT Original LME11. 330C2 Original LME11. 330C2BT LME11. 330C2 combustion controller is used for intermittent operation of single stage small capacity up to 350KW gas burners. LME... is used for monitoring and control of single-stage or double-stage gas burners during start-up and intermittent operation. Flame monitoring is through ionizing rod or flame detector QRA and auxiliary equipment AGQ3 or using blue flame detector QRC. According to the size and specifications of the enclosure, LME... is the same combustion controller as LGB and LMG refer to «Model Overview» Convenient remote reset, multiple colors, display error status [...]