One-button start-up alcohol-based or gas ignition controller

Description

Basic parameters of commercial stove super igniter

The DQ8B super igniter developed by our company is AC220V igniter, which can ignite cigarettes in 1 second. The performance is stable and reliable, and the ignition efficiency is high. It is widely used in commercial energy-saving stoves, boilers, burners, steamers, ovens and other commercial equipment fueled by diesel, gasoline, alcohol, biofuels and various industrial oils. Since its launch in 2010, it has been widely loved by customers, and now customers are located in the Pearl River Delta and the whole country. 1, product model: DQ8B.

2, the main function: delay super ignition, low pressure button switch start, control 220V fan, control 24V solenoid valve. 3, working voltage range: AC175-245V 4, service life: ≥100,000 times

5, ignition intensity: super ignition, can ignite flammable gas and various alcohol-based biofuels, 6, ignition high voltage: ≥ 15KV.

7, delay to stop the ignition time: turn on the AC 220V power supply, automatically stop the ignition after 20 seconds of ignition, time delay ignition can be determined according to customer requirements

8, the igniter has a set of low-voltage switch start lead connected to the low-pressure button switch, one-button start, safer operation, not afraid of leakage and electric shock.

9, the igniter has a set of 220V voltage output leads, which can be used to control the fan.

10, the igniter also has a set of 24V voltage output leads, connected to 24V solenoid valve.

11, the whole epoxy resin is potted, waterproof and moisture proof, and the igniter shell is made of high temperature flame retardant material.

DQ8B commercial stove super igniter lead wire connection description

1, high-voltage line connection: the company strongly recommends customers, the ignition needle is dual-fired, this kind of ignition effect is better, if you can not use single needle with double needle because of the burner, then one of the high-voltage output leads 800mm The ceramic ignition needle is connected, and another high-voltage output lead 800mm must be fixed on the burner with screws. The distance between the ignition needle and the metal of the burner is 5-6mm. The ignition is discharged against the burner to form an ignition circuit. Note that it is not on the stove, it is not attached to the hob. If it is connected to the hob, the ignition circuit is very long. Moreover, the hob and the burner are not necessarily connected, so the ignition is cut off. In the loop, the igniter only uses half the power. Maybe you can hardly understand the truth at the same time. Maybe you will say that I have been connected in this way. It is very good. You just have to try it. So the igniter output high voltage line produced by our company is double long line. For a length of 800mm, refer to the igniter connection diagram below.

2, in order to facilitate the installation, you can customize the length of the cable plug and the connection terminal according to customer needs.

DQ8B commercial stove igniter line plug connection diagram DQ8 commercial stove igniter working process

1. Turn on the 220V power switch and enter the standby state.

2, start the jog button switch, ignitor ignition, fan start the fan can also delay the start, while opening the 24V solenoid valve, you can ignite the combustible gas or alcohol-based fuel, the igniter automatically stops after 20 seconds of ignition, enter Normal combustion, the fan is always working.

3. If you want to stop the stove work, click the button switch. The chef can control the work of the stove conveniently. When you press the switch, you can catch the fire. If you don't use it, turn it off. Commercial stove igniter main product type

The commercial stove igniter series products produced by our company are divided into powerful igniter, super igniter and high-energy igniter according to the ignition intensity. There are two kinds of delay ignition and continuous ignition according to the ignition mode. Electric start, jog button start and switch start, as well as output control fan start, so the following series of products have been produced, customers can purchase according to needs, or customize products according to customer requirements.

1; Strong ignition: This type of igniter is relatively weak, suitable for igniting flammable gas or vaporized alcohol-based fuel, and can also ignite high-purity liquid alcohol-based fuel.

2; super ignition: This type of igniter is strong, can ignite flammable gas and alcohol-based fuel, and the ignition needle can ignite even if it is a little water. It is especially suitable for point-based alcohol-based fuels, which contain different proportions of water in alcohol-based fuels.

3; high-energy ignition: This type of igniter has the strongest ignition capacity. The spark is like a flame. It can ignite some difficult fuels. It is also suitable for large-scale cooking stoves with fans. Because of the fan, the ignition sparks are scattered. Increasing the ignition area makes it easier to catch fire. Customers can choose according to their needs.

The commercial stove igniter produced by our company mainly has the following functions:

1, continuous ignition; ignition after powering until the power is turned off,

2, delay ignition; ignition after ignition for a certain time will automatically stop ignition, a certain time is generally 10-12 seconds, can also be set according to customer needs. If some customers require a delay ignition time of 20 seconds. The advantage of using such an igniter is that the life of the igniter is greatly extended.

3. The low-voltage jog button switch is activated; the igniter has a set of low-voltage switch start leads connected to the low-pressure push button switch to realize low-voltage start-up ignition. This ignition mode is safer, not afraid of leakage and electric shock, and the low-voltage switch starts a little dynamic and the button is self-starting. Lock, this is based on the user's habits to choose.

4, synchronous control of the fan; igniter has a set of 220V voltage output leads, can be used to control the fan or electromagnetic pump.

The above functions can be selected according to their own needs. If there are other functions to be implemented, they can be customized.

The main products of the igniter produced by the company are as follows. 1, DQ7: 220V continuous powerful ignition. 2, DQ2: 220V with extended powerful ignition. 3, DQ6: 220V continuous super ignition. 4, DQ3: 220V with time delay super ignition.

5, DQ5: 220V with time delay super ignition, low pressure button start.

6, DQ8: 220V with time delay super ignition, low pressure button start, synchronous control fan or electromagnetic pump. 7, DY3: 220V continuous high-energy ignition. 8, DY1: 220V with delay high energy ignition.

9, DY2: 220V with delayed high-energy ignition, low-voltage button to start.

10, DY6: 220V with delayed high-energy ignition, low-pressure button start, synchronous control of the fan or electromagnetic pump.

11, DQ8B: 220V with time delay super ignition, low pressure button start, control 220V fan, control 24V solenoid valve switch.