Additional information
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Player |
Brand Name | VAKIND |
Origin | Mainland China |
Certification | NONE |
40.50 $
155967 in stock
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Player |
Brand Name | VAKIND |
Origin | Mainland China |
Certification | NONE |
RC Absorption Circuit Module Relay Contact Protection Resistance Surge AC/DC 5V-400V Snubber Board
Description:
RC absorption circuit is also called RC Snubber
circuit. It is a circuit structure in which resistors and capacitors are connected in series and connected in parallel with switching devices. It is used to improve the voltage and current waveforms of electronic power devices when they are turned on and off. The RC absorption circuit module can prevent the induced electromotive force generated at the moment of turning on and off of the inductive load from causing damage to the switching devices such as relays and thyristors, preventing electromagnetic interference and increasing the anti-interference ability of the microcontroller.
Feature:
Suitable for AC or DC 5~400V inductive load load less than 1000W to protect relay contacts or thyristors.
RC absorption circuit absorbs the induced electromotive force of the inductive load.
There is a varistor to prevent excessive voltage fluctuations and excessive currents from causing adhesion of relay contacts.
Provide circuit anti-interference ability.
Use crimping terminals to make wiring more convenient.
Specification:
Product Size: 30 X 13 X 12mm/1.18 X 0.51 X 0.47
Note:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
1 X RC Absorption Circuit Module
Operational Amplifier OP AMP Tester For Single Dual OPAMP TL071 TL072 TL081/082 Notice: This board is only for people with professional electronic knowledge, we do not provide operation guidance and technical support. Beginners please do not buy! ! From September 27, 2021, the PCB changed to black color. Application: Single op amp and dual op amp screening circuit board, the circuit board can judge whether the IC can be used for amplification, and can roughly judge the conversion rate of the chip at the same time. Can find out those low-speed chips that pretend to be high-speed chips. [...]
58.80 $ Add to cartmost hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
64.20 $ Add to cartIf you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day!!Welcome to my store,Please contact me if you meet any question,I will try my best to satisfy you. We specialized in T-con board and other electronic products. We have own factory and a large number of T-con boards to sell, please contact me what model you [...]
47.90 $ Add to cartProduct name: 2P 63A bus bar 4-12 teethActual specifications: 1.4 thick x 6.6mm wide manual cutting, width plus or minus 0.2mm, tooth width 5.5mm.Product spacing: A phase-A phase spacing 36mm.Product description: Thickness of copper pieces x width of horizontal row width refers to the width of horizontal row of copper pieces, not the width of teeth.Product material: red copper primary color.Product insulation: PVC flame retardant plastic.Scope of use: It can be connected to C45 type, DZ47 type, IC65N type and other miniature circuit breaker air switches specifically depends on the circuit breaker phase spacing, it is not recommended to [...]
43.26 $ Add to cartDC-DC 2-24V to 2-28V Step-UP Power Module SX1308 2A Adjustable Voltage Boost Converter Board Features: Oscillation frequency 1.2MHz, efficiency is as high as 95 Circuit has short circuit protection, overheating protection function. 10k to adjust potentiometer, adjust the output voltage. Description: 1: VIN cathode voltage input 2: GND anode voltage input 3: GND anode voltage input 4: OUT cathode voltage output, the 2 GNDs are intercommunicated, and the pads of the four voltage input/output terminals are 4mm x 4mm pads, and the through hole diameter is 1mm. 5: 10K adjust potentiometer, choose the output voltage [...]
40.46 $ Add to cartDescription: 1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices. 2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection. 3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. The trickle precharging current [...]
40.65 $ Add to cartDC-DC 9V/12V/24V to 5V Step Down Charger Power Module 3A Output USB Car Charging Regulator Buck Voltage Board Descriptions: A switching step-down DC-DC converter module; Fixed switching frequency 150KHz, the chip has excellent linearity adjustment and load regulation, fixed output 5V. The chip integrates reliability modules such as overcurrent protection, overtemperature protection, and short circuit shutdown. Specifications: Input: 5V-36V Output: 5V/3A Conversion Efficiency: 96 Switching Frequency: 150KHz Working Temperature: -40°C-+85°C Load Capacity: Maximum Output 3A, Long-Term Work 2A Product Size: 38 X 16 X 5mm/1.5 X 0.63 X [...]
40.71 $ Add to cartF5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital high and low level. Can be connected to MCU IO port, PLC interface, DC power supply, etc., 3. Input signal voltage: 3V~24V; current: about 5mA. 4. The output terminal can control high-power equipment, motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. 5. Output controlled voltage: 5V~36V. Current: less than 5A, more than 5A need to add a heat sink, [...]
40.90 $ Add to cartU.S. buyer attention: The areas where the US warehouse does not deliver goods are: Hawaii, Alaska, Puerto Rico, Guam and other US overseas territories. And the military address. Spanish buyers attention: if your address includes following postal code please do not choose the Spanish warehouse. The zip code starts with 35/38. Overseas warehouse cannot be delivered. F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital [...]
40.90 $ Add to cartTime Adjsutable Delay Relay Module NE555 Timming Timer Relay Control Switch Board 12V DC Feature: Using NE555 IC. The delay range is 60 seconds adjustable. Specification: Working voltage: 12V DC, allowable range 10V-14.5V Suction current: 45mA 12V, 80mA 6V Quiescent current: 5mA Load switching capacity: 10A 250V AC or 10A 30V DC Size: 55mm x 28mm, height <20mm Product weight: 19g Note: There may be slight size deviations due to manual measurement, different measuring methods and tools. The picture may not reflect the actual color of the item [...]
41.33 $ Add to cart2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging Specification: JST XH Balance Charging Adapter 6S Expansion Board Support 2S-6S lithium battery Suitable for MEGA Power 860 and 960 chargers Dimensions: 60 x 25 x 15mm Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. [...]
41.34 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.