Additional information
Origin | Mainland China |
---|---|
Braking System | Line Pulling Disc Brake |
Model Number | DB - 680 |
Size | 11*11*8CM |
Components | Disc Brake |
69.89 $
4 in stock
Origin | Mainland China |
---|---|
Braking System | Line Pulling Disc Brake |
Model Number | DB - 680 |
Size | 11*11*8CM |
Components | Disc Brake |
zoom
DB680 Disc Brake Mechanical Set Front and Rear
Spyre
finally a mechanical disc brake that offers superior performance and is a nod to put in place. The 680 zoom is a double-sided mechanical where both blocks operate offering yet and precise clamping force. this translates into even pad wear and, with the addition of a simple barrel adjuster, the mat can be adjusted easily and hassle free. no frustration at completely adjusting the entire stirrup, only to have it continue to slide the fixed side, adding wear!
-double operating face.
– even wearing pad
– easy adjustment and set up
– Works with ALL cable operated road levers. we strongly recommend compressionless housing.
-composed works well in dry conditions, but can wear quickly in wet / muddy conditions
ZOOM Brake Level
Brand: ZOOM
Name: brake Bell lever
Material: Aluminum Alloy
Size: 165 x 90 x 22
Weight: left 137G, right 113g, one pair of 251g
Applicable: V-shake on the market, C brake clamp, wire disc brake, cost-effective
Smart Auto On/Off Brake Bike Light Rear By GIYO Specification x Type: Highly Brightness Bike Taillights x Power Supply: USB & 350 mAH Li-on Battery x Light Color: Red x Charge: About 2.2 hours to fully charged, lasts for 10-35 hours x Net Weight: ≈26 g x Light Modes: Constant / Flash 6 totally Features x 【Auto/Manual Mode】Automatically turn on/off depending on the light intensity, braking and motion, Automatically switch to sleep mode to save power, Press the button turn the cycling taillight on, then press button twice to change the different modeauto sign turn on green [...]
55.44 $ Add to cart10/20/30/40/50 Pairs MTB Bike Brake Pads Resin Semi-Metallic Mountain Road Bicycle Cycling Braking Disc Parts for BB8 NOVELA YINXING BOLIDS FOREVIR Specification: Body Material: Resin + Iron Color: Red Product Size: About 33 X 22.5 X 4mm/12.99 X 8.86 X 0.16 2 Sets Net Weight: About 40g Feature: Quiet Mute, Wear-Resistant, Durable Suitable for BB8 NOVELA YINXING BOLIDS FOREVIR, etc. Note: 1. The original disc brake can be disassembled to compare the shapes of the discs. If they are the same, it can be applied. 2. Due to the different monitor and light effect, the actual color of the [...]
51.38 $ Add to cartSpecialized 3 Bearings Pedals they are smooth to use, durable and professional.It is not easy to feel the resistance of pedals after a long ride. Casual DU Bearing Pedals DU bearing is made of metal as the base, and the PTFE material is wrapped on the shaft surface for contact, which will make it rotate smoothly enough. Because there are no mechanical parts, the rotation is not so smooth compared with that of sealed bearing. The lubrication will be improved only after running in. However, it has the advantages that sealed bearing does not have. Its service life is [...]
76.14 $ Add to cartTRP Spyre Installation Video Dual sided actuation. Even pad wear Easy adjustment and set up Works with ALL cable actuated road levers. We HIGHLY recommend compressionless housing. TRPs own ultra-grippy semi-metallic pad that is Shimano M525/M515 compatible allowing for further customization Compound works well in dry conditions but may wear quickly in wet/muddy conditions Rotors and Adapters are NOT included Weight: +/- 162g per caliper Made in Taiwan [...]
140.00 $ Add to cartThis screw is suitable for 2018 clamp screw replacement. According to the original screw improvement, only half of the original screw weight, a bicycle weight loss of 45g. Replace the steel screws in the original brake with titanium screws. A titanium alloy part that never rusts and is lightweight. After the modification, in addition to being light and beautiful, there is no impact on folding and riding. Note: To avoid scratching the nut, the tool for screwing the nut is recommended to use a sleeve or a wrench, and do not use an open end [...]
57.50 $ Add to cartBicycle Centerlock disc Rotor Mountain Road Bike Central line disc brake disc 160/180/203MM Specifications Product:Centerlock disc Rotor Material:stainless steel Weight:161G / 190G / 220G Suitable for: Shimano Alivio/Deore Disc Brake Systems Feature 1.Stainless steel one-piece molding, high strength, good heat dissipation 2.Easier installation-new fastening plate construction for quick and easy 3.The Center lock is designed to effectively extend the service life of the disc and effectively prevent the loss and deformation of the disc 4.Round hollow design for fast heat dissipation 5.Wave shaped outer edge [...]
61.41 $ Add to cartRecommended by color lovers ↓↓ Remarks: if you need other matching combinations for example: Brake Caliper 140 160 180 , Rotor Type,Left hand Front brake and Right hand Rear brake, etc......, please contact customer service, we will assemble them according to your needs. x x Front and rear calipers can only be installed on the left side of a bicycle, please check carefully before buyingIf you have an electric scooter, the length of the tubing is not enough, you need to contact customer service to extend the tubing and pay extra. If you do not contact us and [...]
66.39 $ Add to cartMTB Bicycle Organic Resin Disc Brake pads For SHIMANO SRAM AVID HAYES TEKTRO Magura Formula Cycling Bike Part. It compare the original shape and size of the brake pad,if it is the same,it can be applied! Two pairs needed for one bike. Brake pads are a consumable item and it is advisable to buy a fewextra pairs as spares. 6 Pairs12pcs Resin MTB Bicycle Disc Brake Pads For AVID Elixir & DB SRAM LEVEL TL & T / SRAM Force [...]
50.36 $ Add to cartZTTO Disc Brake Cooling Floating Rotor Material: 7075AL+Stainless Steel Size: Black/Red Weight: about Thickness: 1.8-1.9mm IS 6-Bolts Rotorhole spacing 44mmWith T25 Bolts SPECIAL HEAT SINK ZTTO cooling brake floating rotor increase special heat sink structure, after the heat treatment process, the heat sink is in seamless contact with the outer frame, which is equivalent to a thermal diffuser, heat can be quickly dissipated. HIGH-STRENGTH MATERIAL- Compatible with Metal pad and Resin/Semi-metal pads Rotor outer part use high-strength stainless steel material, inner part use 7075 ultralight thicken aluminum alloy material, full CNC engraving and milling, anodizing black and red [...]
58.06 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.